Fast Start Quick Reference Guide; Spraying Instructions; Cleaning Instructions - Homeright PRO 6.8 Mode D'emploi

FAST START QUICK REFERENCE GUIDE

Spraying Instructions

1
SKIN INJECTION HAZARD
RISK OF EXPLOSION OR FIRE
HAZARDOUS VAPORS
Read all warnings and safety
instructions in the owner's manual
before use.
5
See manual for grounding
instructions
Plug sprayer into outlet.

Cleaning Instructions

1
Unplug sprayer, remove container
and empty contents.
AIRLESS SPRAYERS PRO 6.8 and PRO 8.0
This is only a quick reference.
Read the entire instruction manual prior to using the product.
2
Thin material as necessary. Remove
and fill container with material. Use
a filter to strain material if it is old.
6
Set flow to maximum by turning the
control knob fully counterclockwise.
2
See warnings in manual
Fill sprayer with cleaning solution
and operate trigger until solution
comes through nozzle.
3
Attach pick-up tube to the forward-
most port of the cylinder housing.
Make sure it is securely fastened.
7
INJECTION HAZARD
Now, adjust the spray pattern
by turning the knob back in a
clockwise direction until you have
the spray pattern you want.
3
Remove parts. Clean and dry
thoroughly according to Step Two
Clean Up instructions. See page 10.
4
Attach container to sprayer.
8
HAZARDOUS VAPORS
Spray surface, keeping sprayer
level and 10" to 12" from surface.
Use a sweeping and overlapping
motion.
4
Lubricate sprayer before storing.
ENGLISH 5