Fast Start Quick Reference Guide - Homeright PRO 5.0 Mode D'emploi

FAST START QUICK REFERENCE GUIDE

Spraying Instructions
1
SKIN INJECTION HAZARD
RISK OF EXPLOSION OR FIRE
HAZARDOUS VAPORS
Read all warnings and safety
instructions in the instruction
manual before use.
5
See manual for grounding
instructions
Plug sprayer into outlet.
Cleaning Instructions
1
Unplug sprayer. Remove container
and empty contents.
AIRLESS SPRAYERS PRO 5.0 and 5.5
This is only a quick reference.
Read the entire instruction manual prior to using the product.
2
Mix material thoroughly. Thin
material as necessary. Remove and
fill container with material. Use a
filter to strain material if it is old.
6
Set flow to maximum by turning the
control knob fully counterclockwise.
2
See warnings in manual
Fill sprayer with cleaning solution
and engage trigger until solution
comes through nozzle.
3
Attach pick-up tube to the forward-
most port of the cylinder housing.
Make sure it is securely fastened.
7
INJECTION HAZARD
Adjust the spray pattern by turning
the knob back in a clockwise
direction until you have the spray
pattern you want.
3
Remove parts. Clean and dry
according to Step Two Clean Up
instructions. See Page 9.
4
Attach container to sprayer.
8
HAZARDOUS VAPORS
Spray surface keeping sprayer
level and 10" to 12" from surface.
Use a sweeping and overlapping
motion.
4
Lubricate sprayer before storing.
ENGLISH 5