End Time - Bosch HCB738356M Notice D'utilisation

Use the or button to set the cooking time.
@ A
4.
Default value for @ button = 30 minutes
Default value for button = 10 minutes
A
The oven will start up after a few seconds. The cooking time
counts down in the display and the [
other time symbols go out.
The cooking time has elapsed
A signal sounds. The oven stops heating. 00:00 is shown in the
display. Press the button. You can set a new cooking time
0
using the or button. Or press the
@ A
the function selector to the off position. The oven switches off.
Changing the cooking time
Use the or button to change the cooking time. After a few
@ A
seconds, the change is adopted. If the timer has been set,
press the button beforehand.
0
Cancelling the cooking time
Use the button to reset the cooking time to 00:00. After a few
A
seconds, the change is adopted. The cooking time is
cancelled. If the timer has been set, press the
beforehand.
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The symbol for the time-setting
option that is visible in the display is shown in brackets.
To call up the U timer, r
clock, press the 0 button repeatedly until the brackets are
around the relevant symbol. The display shows the value for a
few seconds.

End time

You can change the time at which you wish your dish to be
ready. The oven starts automatically and finishes at the desired
time. You can, for example, put your dish in the cooking
compartment in the morning and set the cooking time so that it
is ready at lunch time.
Ensure that food is not left in the cooking compartment for too
long as it may spoil.
Example in the picture: it is 10:30 am, the cooking time is
45 minutes and the oven is required to finish cooking at
12:30 pm.
Adjust the function selector.
1.
Set the temperature selector.
2.
Press the button twice.
0
3.
Use the @ or A button to set the cooking time.
4.
] symbol lights up. The
r
button twice and turn
0
button
0
cooking time, p end time or
Press the
0
5.
The brackets are around
ready is displayed.
Use the @ or
6.
After a few seconds, the oven adopts the settings and switches
to standby position. The time at which the dish will be ready is
shown in the display and the
and symbols go out. When the oven starts, you can see the
0
cooking time counting down in the display and the
in brackets. The
The cooking time has elapsed
A signal sounds. The oven stops heating. 00:00 is shown in the
display. Press the
using the or
@
the function selector to the off position. The oven switches off.
0
Changing the end time
Use the or
@ A
seconds, the change is adopted. If the timer has been set, first
press the button twice. Do not change the end time if the
0
cooking time has already started to elapse. The cooking result
would no longer be correct.
Cancelling the end time
Use the button to reset the end time to the current time. After
A
a few seconds, the change is adopted. The oven starts. If the
timer has been set, first press the
Checking the time settings
If several time-setting options are set, the relevant symbols are
illuminated on the display. The symbol for the time-setting
option that is visible in the display is shown in brackets.
To call up the
clock, press the
around the relevant symbol. The display shows the value for a
few seconds.
button.
p . The time when the dish will be
A button to set a later end time.
symbol is in brackets. The
p
symbol goes out.
p
button. You can set a new cooking time
0
button. Or press the
A 0
button to change the end time. After a few
button twice.
0
timer, cooking time,
U r
button repeatedly until the brackets are
0
U
symbol is
r
button twice and turn
end time or
p 0
13