Changing The Settings Of The Wireless Display - Panasonic CF-VSS071 Mode D'emploi

Changing the Settings of the Wireless Display

CAUTION
Be sure that both [LCD Off Timer] and [Power Off Timer] of the wireless display are
set to [Disable] until the wireless display settings have been made.
The computer and the wireless display are disconnected if the power function activates
while the wireless display settings are made, and the connection is not reestablished
after the wireless display is turned on again.
In this case, press the Menu button on the wireless display, then select [Option], then
select [Setup] in [Wireless Connection] and then perform initialization by following the
on-screen instructions. After this, follow the procedure below and change the wireless
display settings.
1
Select
E
Setup Utility]
<Computer's screen>
2
Input [wdsp]*, then select [OK]
* If you have changed the password by selecting [Password] in
Set the necessary items.
This screen is a sample when selecting [64 Bit].
12
on the taskbar with the wireless display, select [Run
<Step 1>
or , input the password.
<When setting the security key>
Set [64 Bit] or [128 Bit].
1
Input 5 hexadecimal numerals for [64
2
Bit].
Input 13 hexadecimal numerals for
[128 Bit].
Select [Key1].
3
(This item is not displayed when se-
lecting [128 Bit].)