Nice SUMO 2000 Instructions Et Recommandations Pour L'installateur page 10

• Children: an automated system ensur es a high level of safety as it
always of fers r eliable and safe operation and its detection systems
stop it fr om moving in the pr esence of people or objects. However ,
children should not be allowed to play near it. Do not let them
accidentally use the system by leaving the r emote control unit within
their reach: it is not a toy!
• Faults. If you notice any abnormal behaviour, disconnect the system
from the electricity supply immediately and perform the manual
release operation. Do not attempt to make r epairs yourself but call in
your fitter: in the meantime the system can work as a non-automated
gate once the gear motor has been released as described further on.
• Maintenance. Just like all machines, your automated system
requires periodic maintenance to ensur e it works as long as possible
and in total safety . Agr ee on a r outine maintenance plan with your
fitter; Nice r ecommends a visit once every six months for normal
residential use but this period can vary depending on how often the
system is used.
All controls, maintenance work or r epairs may only be carried out by
qualified personnel.
• Do not modify the system or its pr
parameters even if you think you can do it: your fitter is r e sponsible for
this.
SU2000
Pull the knob downwards to position 1.
1.
Move the door by hand.
2.
!
The release device must only work when the door is stopped.
Important: if the radio contr ol unit (if supplied) starts working badly
after a time, or does not work at all, the batteries may be flat (They can
last from several months to two/three years depending on the type). Y ou
can notice this fr om the fact that the transmission OK LED is faint,
doesn't light up at all, or lights up for just a moment. Befor e contacting
your fitter, try exchanging the battery with that of another transmitter you
know that works: if this is the r e ason for the fault, just replace the battery
with another one of the same kind.
ogramming and adjustment
• Final testing, r outine maintenance and any r
documented by the fitter and such documents kept by the owner of
the system.
• Disposal. At the end of the life of the automatic system, make sur e
that it is demolished by qualified personnel and that the materials ar e
recycled or disposed of according to local regulations.
• In case of breakage or during a power failure. While waiting for your
fitter to call (or power to come on again if the system does not have
buffer batteries), the system can be used just like any other manual
opening system. T o do this, perform the manual r elease operation:
this can be done by the user and Nice has made it as easy as
possible, without the need for tools or physical ef fort.
SU2010
Are you satisfied? If you wish to add a new automated system to
your house, contact your fitter and we at Nice will pr ovide the advice of
a specialist, the most developed pr oducts on the market, leading-edge
operativeness and maximum compatibility.
Thank you for r eading these suggestions and we trust you ar
satisfied with your new system: please contact your fitter for all your
current or future requirements.
epairs must be
e fully