Selecting Tracks; Fast Searching (Audible); Random Play (Mix); Scanning Tracks (Scan) - Blaupunkt Key West MP36 Notice D'emploi Et De Montage

CD MODE
You must not hinder or assist the drive
as it draws in the CD.
➮ Gently close the control panel
whilst exerting a little pressure until
you feel it clicks into place.
CD playback begins.
Note:
The unit will remain off if the igni-
●
tion is off. To turn it on and play the
inserted CD, press button 1 once.
If a CD is already inserted in the drive
and the unit is playing Radio, CD
Changer or AUX mode.
➮ Press the SOURCE button 4 re-
peatedly until "CD" appears in the
display.
Playback begins from the point at which
it was last interrupted.

Selecting tracks

➮ Press one of the arrow buttons :
to select the next or previous track.
If you press the
the current track will be played again
from the beginning.

Fast searching (audible)

To fast search backwards or forwards,
➮ keep one of the
pressed until fast reversing / fast
forwarding begins.

Random play (MIX)

➮ Press button 5 MIX ;.
"MIX CD" appears briefly in the display
and the MIX symbol lights up. The next
randomly selected track will then be
played.
14
button : once,
or
buttons :
Stopping MIX
➮ Press button 5 MIX ; again.
"MIX OFF" appears briefly in the dis-
play and the MIX symbol disappears.

Scanning tracks (SCAN)

You can briefly play all the tracks on a
CD.
➮ Press the MENU button 9 for
longer than two seconds.
The next track will then be played for
scantime as set in the "Setting the scant-
ime".
Note:
You can set the scantime. For fur-
●
ther details, please read the sec-
tion entitled "Setting the scantime"
in the "Radio mode" chapter.
Stopping SCAN and continuing
playback
➮ To stop scanning, press the MENU
button 9.
The current track will then continue to
be played.

Repeating tracks (REPEAT)

➮ If you want to repeat a track, press
button 4 RPT ;.
"RPT TRCK" appears briefly in the dis-
play and the RPT symbol lights up. The
track is repeated until you deactivate
RPT.
Cancelling repeat
➮ If you want to stop the repeat func-
tion, press button 4 RPT ; again.
"RPT OFF" appears briefly in the dis-
play and the RPT symbol disappears.