Connecting/Removing A Usb Data Carrier; Selecting Tracks; Selecting A Folder (Only In Mp3/Wma Mode); Fast Searching - Blaupunkt Concept Pro II Mode D'emploi Et De Montage

Masquer les pouces Voir aussi pour Concept Pro II:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 35
CD/MP3/WMA mode
Connecting/removing a USB data
carrier
Connecting a USB data carrier
u Switch off the car sound system so that the
data carrier will be correctly registered.
u Pull the protective cap of the USB socket
to the front until it moves out of the socket
and fold it down.
u Connect the USB data carrier.
u Turn on the car sound system.
If the USB data carrier is initially selected as
audio source, the data are read fi rst.
Notes:
• If the connected USB data carrier cannot
be seen, "USB ERROR" is briefl y displayed.
• The time required for reading in the data
depends on the design and size of the USB
data carrier.
Removing a USB data carrier
u Switch off the car sound system so that the
data carrier will be correctly unregistered.
u Disconnect the USB data carrier.
u Close the protective cap of the USB socket

Selecting tracks

u Press the
/
button
to the previous/next track.
Note:
If the current track plays longer than 3 sec-
7
onds, pressing
Selecting a folder
(only in MP3/WMA mode)
u Press the
/
button
to the previous/next folder.
28
9
9
7
briefl y to change
once restarts the track.
7
briefl y to change

Fast searching

u Press and hold down the button
until the desired position has been reached.

Interrupting playback

u Press the 3
playback ("PAUSE") or to continue it.

Scanning all tracks

The scan function scans all available tracks.
u Press the MENU button
onds to start the scan, or briefl y to continue
playing the currently scanned track.
During the scan, the display alternately dis-
plays "PLAY SCAN" and the playing time of
the current track.
Note:
The scan time can be adjusted (see the chap-
ter "User settings", section "Making settings
in the "VARIOUS" menu", menu item "SCAN
TIME").

Playing tracks in random order

u Press the 5 MIX button
the playback modes:
.
Operation Display
CD
MIX ALL
MIX DIR
MP3/
WMA
MIX ALL
Gen.
MIX OFF
If the MIX function is switched on, the icon
MIX (mix all tracks) or MIX
current folder) is shown on the display.
/
;
button to interrupt the
<
for approx. 2 sec-
;
to change among
Meaning
Mixing tracks
Mixing tracks of
the current folder
Mixing tracks of
the data carrier
Regular playback
(mix tracks of
7

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Birmingham 20121 011 200 340

Table des Matières