Instantaneous Volume Reduction (Mute); Telephone Mute (Only Maui Mp36); Telephone Audio / Navigation Audio (Only Key West Mp36) - Blaupunkt Key West MP36 Notice D'emploi Et De Montage

Instantaneous volume reduction
(mute)
This feature allows you to instantane-
ously reduce (mute) the volume to a lev-
el preset by you.
➮ Briefly press button 1.
"MUTE" appears in the display.
To restore the volume,
➮ press button 1 again.
Setting the mute level
You can set the unit's mute volume level.
➮ Press the MENU button 9.
➮ Press the
or
edly until "MUTE LVL" appears in
the display.
➮ Set the mute level using the
buttons :.
When you have finished making your
changes,
➮ press the MENU button 9 twice.
Telephone mute (only MAUI
MP36)
If your car sound system is connected
to a mobile phone, the sound system's
volume will be muted as soon as you
"pick up" the phone.
Telephone audio / navigation
audio (only KEY WEST MP36)
If your car sound system is connected
to a mobile phone or a navigation
system (only KEY WEST MP36), the
sound system's volume will be muted
as soon as you "pick up" the phone or
as soon as a navigation announcement
is made. The phone call or navigation
button : repeat-
and
ADJUSTING THE VOLUME
announcement is then heard over the
car sound system's loudspeakers. This
requires that the mobile phone or
navigation system be connected to the
car sound system as described in the
installation instructions.
You will need a cable for this with the
following Blaupunkt number: 7 607 001
503.
You can set the volume at which you
want phone calls and navigation an-
nouncements to be initially heard.
➮
Press the MENU button 9.
➮
Press the or
edly until "TEL VOL" appears in the
display.
➮
Set your preferred volume level us-
ing the or
When you have finished making your
changes,
➮
press the MENU button 9 twice.
Note:
You can use the volume control 3
●
to adjust the volume of a telephone
call and navigation announcements
whilst you are listening to them.
You can adjust the tone and vol-
●
ume distribution settings for tele-
phone calls and navigation
announcements. For further
details, please read the chapter
entitled "Tone and volume distribu-
tion settings". The settings can only
be adjusted and stored during a
telephone call or navigation
announcements.
button : repeat-
button :.
9