Cleaning And Maintenance - Philips GC4930 Série Mode D'emploi

ENGLISH
8
Ironable fabrics
Check whether the garment is ironable by reading the label on the garment (Fig. 1-5).
1
Do not iron non-ironable fabrics. Prints on the garment are not ironable either.
Iron with extra steam
Press and hold the steam boost trigger to get more steam to remove stubborn creases.
Auto shut-of
The auto shut-of function automatically switches of the appliance if it has not been
used for 2 minutes resting on its soleplate or 8 minutes resting on its backplate. The 'iron
ready' light lashes to indicate the appliance is at auto-of status.
To let the appliance heat up again, pick up the appliance or move it slightly. The 'iron
ready' light turns to breathing and the appliance starts to heat up.

Cleaning and maintenance

For more information on how to performance clean and maintenance on the iron, refer to
the videos in this link : http:/ /www.philips.com/descaling-iron.
Cleaning the soleplate
Unplug the appliance and let it cool down.
1
Pour any remaining water out of the water tank.
2
Wipe lakes and any other deposit of the soleplate with a damp cloth and a non-
3
abrasive (liquid) cleaning agent.
Note: To keep the soleplate smooth, avoid hard contact with metal objects. Never use a
scouring pad, vinegar or other chemicals to clean the soleplate.
Quick Calc Release (speciic types only)
IMPORTANT: The Quick Calc Release automatically collects loose scale particles during
ironing. After 1 to 3 months of use, the Calc-Clean reminder light starts lashing to
remind you to use the Quick Calc Release function (Fig. 2-1). This is to remove scales
collected from your iron to prolong its life. When the Calc-Clean reminder light is
lashing, the iron does not heat up.
Tip: The Quick Calc Release function can be used at any time, even when the reminder
light is not activated yet. If you live in a hard water area, use the function more frequently.
Do not perform the Quick Calc Release when the iron is hot. Do not pour water into the
Quick Calc Release opening.
1 Unplug the appliance (Fig. 2-2) and make sure that the appliance is cool (Fig. 2-3).
2 Hold the appliance in vertical position over the sink.
3 Flip up the lever of Quick Calc Release collector (Fig.2-4) and pull out the collector
(Fig.2-5).
4 Clean the Quick Calc Release collector with water (Fig. 2-6, Fig. 2-7).
5 Gently shake the appliance to allow scale particles to fall out (Fig. 2-8).