Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
SET BOWDOWN TO BE VERTICAL
BowDown
should be as
close to vertical
as possible.
If necessary
adjust mounts.
SECURE BOWDOWN TO CROSSBAR
Close bail around crossbar,
passing t-bolt through bail.
NOW COMPLETELY
TIGHTEN THE
BOWDOWN USING
FIRM PRESSURE.
INSTALL SECOND BOWDOWN
1033423E-3/21
90°
90°
Rotate t-bolt.
If necessary adjust
the waffle blocks.
Push t-bolt to rest in slot.
Repeat Steps 1 through 6 to
install second BowDown.
Blocks will self
tighten when
BowDown is
tightened.
Publicité
Table des Matières
