Yakima JayHook Instructions De Montage page 2

Attach base pads to bases with plugs.
Attach bails to metal brackets using long bolts.
With the t-bolt free, position the
Jayhooks on the factory crossbars.
Instruction #1035832A-2/21
Install metal bracket
over bases.
Insert bolt into round
hole, and T-bolt
into slotted hole.
With brackets in place,
attach pads onto bases.
Plugs can be used only once.
If you reconfigure the bases, see your Yakima
Dealer for replacement plugs # 8890058.
AttAch the knobs.