Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
CAPACITANCE
1. Insert RED test lead into V jack
COM jack
4
Continuity/Resistance/Diode/Capacitance
NOTE: The meter defaults to Continuity testing in this mode. To
enter Diode testing mode, press the "SEL" button
The Diode icon
2. Remove power from circuit.
3. Measure capacitance by connecting test leads across the
capacitor. The meter will auto-range to display the measurement
in the most appropriate range.
FREQUENCY / DUTY-CYCLE
1. Insert RED test lead into V jack
COM jack
Frequency/Duty-Cycle
NOTE: The meter defaults to Frequency testing in this mode. To enter
Duty-Cycle testing mode, press the "SEL" button
that the appropriate icon (either Hz or % ) appears on the display.
2. Measure by connecting test leads across the circuit.
OPERATING INSTRUCTIONS
, and rotate function selector switch
will appear on the display.
Black lead
Red lead
, and rotate function selector switch
4
Black lead
Red lead
, and BLACK test lead into
5
and BLACK test lead into
5
setting.
to the
2
setting.
three times.
11
to the
2
once. Ensure
11
15
Publicité
Table des Matières
