Waldbeck Yukon Mode D'emploi page 42

EN
42
c. Sweep the four metal samples about 7 to 10cm above the search coil
in turn.
d. When sweeping the 25 ¢ silver coin, the detector will respond,
meaning the 25 ¢ silver coin has been remembered.
e. When sweeping the other three samples, the detector won't respond.
f. If want to look for other materials, press the "MODE" button once
again, so that the operation mode still points to MEMORY, and still
shows figure 12. Then, repeat the above operation.
g. At this time, in order to exit MEMORY mode, press the MODE button,
let the detector be back to the state of figure 12. Press the MODE
button, exiting the MEMORY mode, and go into the next operation
mode:
7. COINS mode test
a. Press the MODE button again, the operation mode cursor points to
COINS. The three patterns of iron nail, bottle cap and pull-tabs in the
lower cursor corresponding to the target discrimination cursor are
extinguished, which means the three trash metals are eliminated.
b. Sweep the four metal samples 7 to 10 cm above the search coil in turn.
c. When sweeping the iron nail, he detector will not respond, nd the
"iron" is eliminated.
d. While sweeping the other three samples, the response of the detector
is the same with the ALL METAL mode.
8. PINPOINT mode test
a. Touch the "PINPOINT" button, the PINPOINT cursor is lighted
and flashed. The PP cursor won't flash until the detector has been