Quick Start - Waldbeck Yukon Mode D'emploi

QUICK START

Preparation of the metal detector
1. Prepare with the four metal samples: an iron nail, a 5-dollar nickel coin, a
1-dollar zinc coin, a 25-dollar silver coin
2. Lay the detector
Place the detector on a wooden or plastic table, let the search coil exceeds
the table edge about more than 30 cm. Keep the detector be away from the
wall, ceiling and floor, turn off all the equipment which can cause electro-
magnetic interference. Please take off the watch, ring or other metal objects
on your hand.
3. Turn on
Press the POWER button, and the detector will sound two moo tones,
all the LCD patterns will be lighted a moment, the detector will be in the
EN
39