Safety Instructions; Elimination - Waldbeck Yukon Mode D'emploi

EN
28

SAFETY INSTRUCTIONS

Please read the manual carefully before installing and operating the device
and keep it for future use.
• In areas with heavy traffic, please not wear earphone, in case an accident
occurs.
• Always obtain permission before searching any site.
• Keep away from the region where may bury electrical line, cable line or
pipeline, in particular the pipes that are full of flammable gases and liquids.
• Do not detect in the military area where may bury bombs or gas
explosives.
• When excavating the target, use the reasonable method, not destroy the
vegetation. Leave the land and vegetation as it was, fill in the holes after
the excavation.
TERMINOLOGY
The following terms are the common terminology among metal detector:
Motion Mode
This is one of the circuit operation mode in the metal detection technology.
When detecting, you should move the search coil continuously during
detecting. In generally, motion mode can reduce the effect of the soil
mineralization, and will have a better discrimination ability.
Non-motion Mode
This is the other circuit operation mode in the metal detection technology.
When detecting, you needn't move the search coil continuously, as long as the
search coil approaches the metal at a certain distance, you will achieve the
detection. In the non-motion mode, the detector can't discriminate the metal
types.

Elimination

To eliminate a particular metal, which is a setting of the operator. During
detecting, when the detector find the specified metal, the detector will not
send prompt signal, such as light, electricity and sound.
Discrimination
To different types of metals, the detector will sound a different tone or give
a different indication, and it will also eliminate the specific metal, we refer to
this as "discrimination". Discrimination ability is an important feature of metal
detector.