Waldbeck Yukon Mode D'emploi page 38

EN
38
displaying, and carry on the second set. If no longer set, press the
MODE button again, exit the MEMORY state, and enter the next
operation mode.
d. COINS – the detector eliminates the iron, pull-tabs and S-CAP, only be
respond to all kinds of coins.
SENS (sensitiviy)
Choose the 4 levels with SENS button. Boot setting is at the middle value(the
second gear). The highest sensitivity is the fourth level. When there is
interference, setting the sensitivity lower properly. In the PINPOINT mode,
the SENS button is useless.
P-P key
Touch the "PP"button. The detector turns into PINPOINT mode, and it no
longer has the ability to identify. At this moment, the PP cursor is lighted,
and indicates the signal strength. The more close to the metal target, the
more the strength cursor is lighted, the more louder the sound is, in order
to locate the target position accurately. Touch the "PP"button again, exit the
PINPOINT state.