urmet domus 1072 Manuel page 17

1) Open the door phone hood.
2) Move jumper W1 from position "a" to position
"b" (see fi gure 1).
3) Close the door phone hood.
4) Press button 6 (auxiliary service button). The
door phone tone will change each time the
button 6 is pressed. Go to the next step once
the chosen ringer has been selected.
5) Press button 5 (concierge call button). The fl oor
call tone will change each time the button 5 is
pressed. Go to the next step once the chosen
ringer has been selected.
6) Open the door phone hood.
7) Return jumper W1 to position "a".
8) Close the door phone hood.
32
DOOR PHONE WITH MULTIPLE
RINGER TONES AND MUTE FUNCTION
Ref. 1172/35
PERFORMANCE
• Works in 2nd Edition systems only.
• Conversation privacy function (single integrated
decoder).
• Possibility of selecting one of six door phone
ringer tones.
• Possibility of selecting one of six fl oor call ringer
tones.
• Supplementary speaker for fl oor call and door
phone call.
• Door opener button.
• Staircase light button.
• Switchboard call button.
• Video bracket control output.
• Visual call in progress signal.
• Door open indication (if service is active).
• "Automatic door opener" function.
• Two-position door unit call volume.
• Ringer mute function with visual indication by
means of LED (slow blinking).
• Supplementary ringer 1072/59 control.
• Confi guration function button.
STRUCTURE
The multiple ringer door phone consists of the
following parts:
11 10 9
7
6
VOLUME
5
4
3
2
1
12 13
1 2 3
1. Base
2. Hood
3. Call speaker compartment
4. Confi guration function button.
DS1072-021
5. Concierge call button
6. Staircase light button
7. Open door LED
8. Open door button
9. Terminal board
10. Handset lever
11. Handset
12. Supplementary ringer connection terminals
13. Volume/mute regulation
DESCRIPTION OF TERMINAL BOARDS
L1: bus connection (not polarised)
L2: bus connection (not polarised)
C1: fl oor call button input
C2: fl oor call button input
S+: supplementary ringer control positive
S-: supplementary ringer control negative
TECHNICAL SPECIFICATIONS
Stand-by consumption:
Active voice consumption:
Working temperature range:
Humidity:
Supplementary ringer control:
PROGRAMMING
Refer to the programming chapter for instructions on
programming the door unit with digitiser Ref. 1072/19A
or 1072/5.
8 NOTE: The following method can be used to
program the door phones without accessing
7
each apartment if no door phones have
been programmed and if the system is set
6
up for fl oor call function:
a) Book door phones on calling station as
5
usual and go to the fi rst booked user.
b) Press the fl oor call button; the door phone
tone will be heard after programming.
c) Wait for fi ve seconds and press the fl oor
4
call button; the door phone (if programmed)
will output the fl oor call tone.
d) Go to other users and repeat procedure
from point b).
OPERATION
The door phone can generate six different calling
tones. The LED will blink to visually confi rm selection.
The LED will light up fi xed to indicate that one or
more main input doors or the respective secondary
door is open (where the service is activated only).
DS1072-021
The door opener button will operate the lock in the
following cases:
• for the entire conversation time;
• without hanging up for the programmed off-hook
waiting time.
Calls can be made to the concierge in systems with
concierge phone or switchboard.
Concierge calls in 2nd Edition systems with
concierge switchboard.
Lift the handset and press the concierge call button.
Nothing will happen if the switchboard is off. Conversely,
the door phone will beep and the call will be sent if the
switchboard is on. Two possibilities may occur:
1. the switchboard answers within 10s or the door
phone line is free: a conversation with the
switchboard is established;
2. the switchboard does not answer within 10s or
the door phone line is busy: the switchboard
stores the call and the LED on the door phone will
fl ash after the 10s time-out. Hang up and wait for
the switchboard operator to return the call.
1.6mA max. Concierge calls in 2nd Edition systems with
40mA max. concierge door phone.
-5 +45°C Lift the handset and press the concierge call button.
90% RH @ 30°C Nothing will happen if the door phone is off.
V max=30Vdc Conversely, the concierge door phone will beep and
I max=40mAdc the call will be sent if the concierge door phone is
on. Two possibilities may occur:
1. the concierge answers within 10s or the door
phone line is free: a conversation with the
concierge is established;
2. the concierge does not answer within 10s or the
line is busy: the door phone LED will fl ash after
the 10s time-out. Hang up and try again later.
Selecting calling tones
The door phone is equipped with six two-tone
calling tones each lasting 3 seconds. The door
phone calling tone and the fl oor calling tone can be
selected as follows:
Door phone call: Hold the confi guration button pressed
and press the "staircase lights" button: the door phone
will play the six tones in sequence. Simply release the
confi guration button when the required tone is playing.
Floor call: Hold the confi guration button pressed
and press the "door phone switchboard call" button:
the door phone will play the six tones in sequence.
Simply release the confi guration button when the
required tone is playing.
Automatic door opener
This function is used to open the door automatically
following a call.
Hold the confi guration button pressed and press the
door opener button to switch the function on and off; a
confi rmation tone will be heard and the LED will blink
when the door opener button is switched on and off.
The LED will blink quickly when the function is on.
33