urmet domus 1072 Manuel page 16

Concierge calls in 2nd Edition systems with
concierge switchboard
Lift the handset and press the concierge call
button. Nothing will happen if the switchboard is off.
Conversely, the door phone will beep and the call
will be sent if the switchboard is on. Two possibilities
may occur:
1. the switchboard answers within 10s or the door
phone line is free: a conversation with the
switchboard is established;
2. the switchboard does not answer within 10s or
the door phone line is busy: the switchboard
stores the call and the LED on the door phone
will fl ash after the 10s time-out. Hang up and
wait for the switchboard operator to return the
call.
Concierge calls in 2nd Edition systems with
concierge door phone.
Lift the handset and press the concierge call button.
Nothing will happen if the door phone is off.
Conversely, the concierge door phone will beep and
the call will be sent if the concierge door phone is
on. Two possibilities may occur:
1. the concierge answers within 10s or the door
phone line is free: a conversation with the
concierge is established;
2. the concierge does not answer within 10s or the
line is busy: the door phone LED will fl ash after
the 10s time-out. Hang up and try again later.
Concierge calls in 1st Edition systems with
concierge switchboard or door phone.
Lift the handset and press the concierge call
button. Nothing will happen if the switchboard is
off. Conversely, two possibilities may occur if the
switchboard is on:
1. the door phone line is free: the call will be sent
and two beeps will be heard. The LED will fl ash.
Communication with start when the concierge
picks up;
2. the door phone line is busy: no call is sent, the
door phone does not sound and the LED does
not fl ash. Hang up and try again later.
30
DOOR PHONE WITH MULTIPLE
RINGERS Ref. 1172/34
PERFORMANCE
• Works in 2nd Edition systems only.
• Conversation privacy function (single integrated
decoder).
• Possibility of selecting one of six calling tone
ringers during installation.
• Possibility of selecting one of six door phone to
fl oor calling tone ringers during installation.
• Supplementary speaker for fl oor call and door
phone call.
• Door opener button.
• Staircase light button.
• Switchboard call button
• Video bracket control output.
• Visual call in progress signal.
• Door open indication (if service is active).
• Three-position door unit call volume.
STRUCTURE
The multiple ringer door phone consists of the
following parts:
11 10 9 8
7
6
VOLUME
5
4
3
2
1
12 1 2 3
1. Base
2. Hood
3. Call speaker compartment
4. Concierge call button
5. Staircase light button
6. Open door LED
7. Open door button
8. Ringer programming jumper
9. Terminal board
10. Handset lever
11. Handset
12. Volume adjustment
DS1072-021
DESCRIPTION OF TERMINAL BOARDS
L1: bus connection (not polarised)
L2: bus connection (not polarised)
C1: fl oor call button input
C2: fl oor call button input
TECHNICAL SPECIFICATIONS
Stand-by consumption:
Active voice consumption:
Working temperature range:
Humidity:
Supplementary ring control
positive (only 1172/32):
PROGRAMMING
Refer to the programming chapter for instructions on
programming the door unit with digitiser Ref. 1072/19A
or 1072/5.
NOTE: The following method can be used to
program the door phones without accessing
each apartment if no door phones have
been programmed and if the system is set
up for fl oor call function:
a) Book door phones on calling station as
7
usual and go to the fi rst booked user.
b) Press the fl oor call button; the door
6
phone tone will
programming.
5
c) Wait for fi ve seconds and press the
fl oor call button; the door phone (if
4
programmed) will output the fl oor call
tone.
d) Go to other users and repeat procedure
from point b).
OPERATION
The door phone can generate six different calling
tones. The LED will blink to visually confi rm
selection.
The LED will light up fi xed to indicate that one or
more main input doors or the respective secondary
door is open (where the service is activated only).
The door opener button will operate the lock in the
following cases:
• for the entire conversation time.
• without hanging up for the programmed off-hook
waiting time.
Calls can be made to the concierge in systems with
concierge phone or switchboard.
DS1072-021
Concierge calls in 2nd Edition systems with
concierge switchboard.
Lift the handset and press the concierge call
button. Nothing will happen if the switchboard is off.
Conversely, the door phone will beep and the call
will be sent if the switchboard is on. Two possibilities
may occur:
1. The switchboard answers within 10s or the
door phone line is free: a conversation with the
switchboard is established.
1.6mA max. 2. The switchboard does not answer within 10s or
40mA max. the door phone line is busy: the switchboard
-5 +45°C stores the call and the LED on the door phone
90% RH @ 30°C will fl ash after the 10s time-out. Hang up and
wait for the switchboard operator to return the
V max=30Vdc call.
I max=40mAdc
Concierge calls in 2nd Edition systems with
concierge door phone.
Lift the handset and press the concierge call button.
Nothing will happen if the door phone is off.
Conversely, the concierge door phone will beep and
the call will be sent if the concierge door phone is
on. Two possibilities may occur:
1. the concierge answers within 10s or the door
phone line is free: a conversation with the
concierge is established.
2. the concierge does not answer within 10s or the
line is busy: the door phone LED will fl ash after
the 10s time-out. Hang up and try again later.
Selecting calling tones
be heard after The door phone is equipped with six two-tone
calling tones each lasting 3 seconds. The door
phone calling tone and the fl oor calling tone can be
selected during installation as follows:
Fig. 1
W1 - (b)
W1 - (a)
31