Siemens EchoMax ST-H Guide Rapide page 8

Specifications
Measurement Range
Pressure
Supply Source
Frequency
Beam Angle
Weight*
Separation
Environmental
Location
Altitude
Ambient Temperature
Construction
Housing
Mounting
Cable
Options
Approvals
* Approximate shipping weight of transducer with standard cable length.
** For chemical application check compatibility of ETFE or PVDF and epoxy, or mount joint external to process.
*** Performance available upon request.
Page EN-6 ST-H Transducer – QUICK START MANUAL
ST-H Transducer
0.3 - 10 m (1 - 33 ft)
vent to atmosphere
transducer shall only be supplied by a Siemens Milltronics
certified controller
44 kHz
12°
1.4 kg (3 lbs)
365 m (1200 ft) from transceiver
indoor/outdoor
2000 m (maximum)
-20 to +60 °C (-5 to +140 °F) (ATEX approved model,
INMETRO)
-40 to +73 °C (-40 to +163 °F) (CSA/FM approved model)
PVDF or ETFE base and lid (epoxy fitted joint)**
2" NPT (Taper), R 2" (BSPT), or G 2" (BSPP) process
connection
2-core shielded/twisted, 0.519 mm
• flange adapter, refer to associated instructions
CE***, FM, ATEX, C-TICK, INMETRO,
CSA (ETFE only)
2
(20 AWG), PVC sheath
A5E32105880