Hendi 230299 Manuel De L'utilisateur page 10

Starting the washing program
CONTROL PANEL FOR DISHWASHER 40x40
CONTROL PANEL FOR DISHWASHER 50x50
CONTROL PANEL FOR HOOD TYPE DISHWASHER 50x50
EN
Correct insertion of baskets
10
1. Open the main external water control valve and
press on the power safety switch dedicated to
the cup washer.
2. Make sure the tank filter "B" of the cup wash-
er has been properly placed in the bottom (see
figure opposite).
3. Make sure the overflow pipe "A" (overflow tube)
has been fitted properly (see figure opposite).
4. Turn on the cup washer by pressing the "ON/
OFF" button - the green "POWER" indicator
will light up - this means that the appliance is
powered on.
5. The cup washer tank starts filling with water
(on the first start-up of the appliance, the boiler
will start filling first).