User Safety; Safety Guidelines; Warning Labels - DeWalt DW089LR Mode D'emploi

User Safety

Safety Guidelines

The defi nitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in
death or serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in
death or serious injury.
CAUTION: Indicates a potentially hazardous
situation which, if not avoided, may result in
minor or moderate injury.
NOTICE: Indicates a practice not related to personal
injury which, if not avoided, may result in property
damage.
If you have any questions or comments about
this or any D WALT tool,
E
call 1-800-4-DEWALT (1-800-433-9258)
or go to www.DEWALT.com.
WARNING:
Never modify the tool or any part of it. Damage
to the laser or personal injury could result.
WARNING:
Read and understand all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fi re and/or serious
injury.
SAVE THESE INSTRUCTIONS
WARNING:
Laser Radiation Exposure. Do not
disassemble or modify the laser level.
There are no user serviceable parts inside.
Serious eye injury could result.
WARNING:
Hazardous Radiation. Use of controls or
adjustments or performance of procedures
other than those specifi ed herein may result in
hazardous radiation exposure.
The label on your laser may include the following
symbols.
Symbol Meaning
V Volts
mW Milliwatts
Laser Warning
nm Wavelength in nanometers
2 Class 2 Laser

Warning Labels

For your convenience and safety, the following labels
are on your laser.
WARNING: To reduce the risk of injury,
user must read instruction manual.
WARNING: LASER RADIATION. DO
NOT STARE INTO BEAM. Class 2 Laser
Product.
5002595
≤1.5mW @ 630-680nm
IEC 60825-1: 2014
5002595
≤1.5mW @ 630-680nm
IEC 60825-1: 2014
• If the equipment is used in a manner not
specifi ed by the manufacturer, the protection
provided by the equipment may be impaired.
E
5002595
≤1.5mW @ 510-530nm
IEC 60825-1: 2014
5002595
≤1.5mW @ 510-530nm
IEC 60825-1: 2014
11