Changing The Tail Light Bulbs - APRILIA SCARABEO 250 Mode D'emploi

PARKING LIGHT BULB
Do not pull on the wires to remove the
bulb holder.
Grasp the bulb holder (11) and pull to
u
extract.
Remove the parking light bulb (2) and fit
u
a new bulb of equal rating.
70 use and maintenance Scarabeo 250
C H A N G I N G T H E TA I L L I G H T
BULBS
Carefully read page 68 (BULBS)
The tail light fits:
– A parking light/stoplight bulb (1).
– One number plate bulb (2).
To change the bulbs:
Loosen the screws (3).
u
Remove the lens (4).
u
PARKING LIGHT/STOPLIGHT BULB
Push down the bulb (1) gently and twist
u
counter clockwise.
Extract the bulb from its seat.
u
NOTE
Insert the bulb into the bulb
holder so that the two pins slide into the
slots in the holder.
Fit a new bulb of equal rating.
u
NUMBER PLATE BULB
Remove the bulb (2) and fit a new bulb of
u
equal rating.
NOTE
Make sure that the lens locates
correctly into its seat on refitting.
Tighten the screw (3) moderately to
avoid damaging the lens.