Urmet NVR Boost 2.0 Série Guide Rapide page 47

•
•
Confirm pressing "OK" for more times and exit from Internet Options mode.
Proceed with Active X installation from Internet Explorer.
2. One of the two pages will appear below after having installed Active X according to the type of access:
Direct access to the device
3. Fill in the required fields in both cases: User Name, Password and Client Port. Then select the language and
stream type.
For access via the URMET DDNS portal only, enter the NVR ID previously created in the NVR menu.
Remember that the default access parameters are:
User Name: admin
-
Password: 00000000 (Default)
-
Enter the correct access credentials if other users were created in the NVR user menu or if the default password
was modified.
4. Select [Login] to access device web interface as shown in the screenshot on the bottom left.
DS1093-133B
Select "Custom Level" and check that the item:
"Initialize and script Active X controls not marked as safe" is selected as "Enable" or "
Prompt"
"Download insigne Active X controls" is selected as "Enable" or "Prompt"
Access via URMET DDNS portal
47