Description (Fig. 1); Preparation Of The Coating Material - WAGNER WOOD&METAL EXTRA DETAIL Mode D'emploi

GB
Before using the attachment, read these operating instructions and familiarise
yourself with the operating instructions for the basic unit. Keep the operating
instructions in a safe place. The safety instructions for the basic unit apply to this
Detail spray attachment.
General instruction
The Detail spray attachment was developed for applying water-soluble
paints and lacquers as well as paints and lacquers containing solvents.
Thanks to its particularly fine spray jet the attachment allows direct paint
application and thus the coating of thin, small and filigree objects. It
is excellently suitable for detailed and creative work.
The special form of the 250-ml container makes it possible to mix small quantities of
valuable paint and to spray the paint without residues.
•
CAUTION! The units may only be used with a functional valve. If paints rises in the
ventilating hose (Fig. 1 A, item 12) do not operate the unit further!
Dismantle and clean the ventilating hose, valve and diaphragm and replace
the diaphragm if necessary.
•
Do not place the spray gun on the side.
•
Do not combine components from different spray attachments.
The parts could be damaged.
1) Gun body
3) Nozzle seal
5) Air cap
7) Material quantity regulation
9) Container seal
11) Container
13) Valve cover
15) O-ring

Preparation of the Coating Material

The paints usually need to be diluted for use with the spray gun. The Detail spray attachment
can be used to process coating materials up to a maximum flow time (viscosity) of 30
seconds.
Measuring the Viscosity (Fig. 2)
1. Stir the coating material thoroughly before measuring.
2. Dip the viscosity test cup (16) completely into the coating material.
3. Hold the test cup up and measure the time in seconds until the liquid empties out.
Compare the measured "runout time" with the Viscosity Table.
6

Description (Fig. 1)

2) Needle
4) Nozzle
6) Union nut
8) Trigger
10) Feed tube
12) Ventilating hose
14) Diaphragm
16) Viscosity test cup
Detail spray attachment