Remote Control - Dutch originals DO-CH-ACON120 Manuel D'utilisation

Modes
Power ON/OFF
Press the power button on the device
POWER LED indicator
When switching on the device for the first time, it will automatically start in SMART mode.
When switching on the device, when it already has been powered on, it will start in the last
selected mode.
To switch off the device, press the power button on the device
again, until the POWER LED indicator
Operation mode
The device has 4 selectable mode functions: Smart - Cool – Dehumidifying – FAN.
Press the mode button on the device
Cooling mode
Press the mode button on the device
on the digital control panel lights up.
9C
Select the desired temperature by pressing the increase
device.
Or select the desired temperature by pressing the increase
the remote control.
The temperature can be set between 16°C and 32°C.
Note! The device will automatically stop cooling when the room temperature is lower
than the selected temperature!
FAN Speed
Repeatedly press the fan SPEED button on the device
required FAN speed has been selected. There are 2 selectable FAN speeds; High speed &
low speed.
While pressing the required FAN speed, the LED display
speed.
To control the vertical direction (left/right) of the airflow, adjust the louver in the air outlet
A
B
C
D
or remote control
1
on the digital control panel lights up.
1
on the digital control panel switches off.
1
or remote control
4
or remote control
4
E
F
G
H
A
E
E
or decrease
6
B
or remote control
3
or
9F
EN 10

REMOTE CONTROL:

A Power ON/OFF
Increase
B
C Decrease
Timer
D
Mode
E
FAN speed
F
Standby mode
G
Auto swing
H
to switch on the device. The
or remote control
1
to select the desired mode.
until the COOL LED indicator
button on the
7
C
or decrease button on
F until the
will indicate the selected
9G
A
2