Publicité
1
DISASSEMBLE THE WHEEL ASSEMBLIES.
Remove the knob and snaparound from the wheel.
2
INSTALL THE SNAPAROUNDS.
3
INSTALL THE WHEELS.
Install 2 front wheels on one side of the basket and 2 rear wheels
on the opposite side of the basket by placing the wheels around the
tubing as shown and aligning it with the SnapAround™. Then install
the knobs and tighten firmly to secure the wheels to the basket.
Instruction #1036043A - page 2 of 6
ASSEMBLY AND INSTALLATION
SwingBase™ or EXO TopShelf™. Follow your EXO
GearWarrior™ instruction to install the basket on
your EXO System. CAUTION! Never operate the
vehicle with the EXO WarriorWheels™ installed
wheels and handle before operating the vehicle!
Install the
snaparounds on
the bar in the
locations shown.
2X
NOTE: The easiest way to install the wheels
is with the basket installed on your EXO
on your EXO System. You must remove the
2X
4X
4X
1.5 Nm
4X
Publicité
