Storage And Transport - EINHELL GE-LM 36/4in1 Li Instructions D'origine

10. Storage and transport

Remove the batteries. Store the tool and its ac-
cessories in a dark and dry place at above free-
zing temperature. The ideal storage temperature
is between 5 and 30 °C. Store the electric tool in
its original packaging.
The tool has an integrated wall holder (Fig. 48/
Item M) for hanging it up.
•
Always hold the tool with one hand on the
handle and the other hand on the steady grip.
Do not carry the tool by its motor housing.
•
Secure the tool against slipping if you trans-
port it in a vehicle.
•
As far as possible, use the original packaging
for transporting the tool.
•
Clean the cordless multifunction tool and car-
ry out its maintenance before you put it into
storage.
•
If you are not going to use the cordless pole-
mounted pruner for an extended period of
time, remove the chain oil from the tank.
Briefly immerse the saw chain and the cutter
rail into an oil bath and then wrap them in oil
paper.
•
During storage or transportation, use the sup-
plied safety guards for the cutting blade, cut-
ter rail/saw chain and hedge trimmer blade.
Anl_GE_LM_36_4in1_Li_SPK9.indb 46 Anl_GE_LM_36_4in1_Li_SPK9.indb 46
GB
For EU countries only
Never place any electric power tools in your
household refuse.
To comply with European Directive 2012/19/EC
concerning old electric and electronic equipment
and its implementation in national laws, old elec-
tric power tools have to be separated from other
waste and disposed of in an environment-friendly
fashion, e.g. by taking to a recycling depot.
Recycling alternative to the return request:
As an alternative to returning the equipment to
the manufacturer, the owner of the electrical
equipment must make sure that the equipment
is properly disposed of if he no longer wants to
keep the equipment. The old equipment can be
returned to a suitable collection point that will
dispose of the equipment in accordance with the
national recycling and waste disposal regulations.
This does not apply to any accessories or aids
without electrical components supplied with the
old equipment.
Please note that batteries and lamps (e.g. light
bulbs) must be removed from the tool before it is
disposed of.
The reprinting or reproduction by any other me-
ans, in whole or in part, of documentation and
papers accompanying products is permitted only
with the express consent of the Einhell Germany
AG.
Subject to technical changes
- 46 -
21.04.2022 16:02:42 21.04.2022 16:02:42