Publicité
Les langues disponibles
Les langues disponibles
STEPS 7 AND 8 ARE FOR THE 2000/3000 SERIES GRILL WITH TWO SIDE
Step
Assemble Pre-Assembled LEFT SIDETABLE in detail 7-A.
7
Assemble the SIDE TABLE (9). See detail 7-B.
Note: Use both hands and lift with side table brackets. NEVER lift with plastic parts.
7-A
P
- A
RE
SSEMBLED
S
IDETABLE
11
Left
6-
LOBE
SCREWDRIVER
TABLES. IF YOU HAVE A SIDE BURNER CONTINUE ON TO PAGE 12.
12
13
7-A. If you have a SIDEBURNER continue on to page 13 now.
Use the 6-lobe screwdriver to back out the outside screws located
in the top left legs (2 or 3 turns) just enough for the SIDE BRACKETS
(11 and 13) on the PRE-ASSEMBLED sidetable, to slide in place.
CAUTION: DO NOT Remove screws completely.
Place the bottom slot of the brackets on the screws first and then the
top slot. Note: The TOOL BAR (12) faces the front of the grill.
Gently slide the Bracket down and tighten screws.
7-B
9
Left
Grill
Front
7-B. Place the SIDE TABLE (9) inside the side frame.
Grill
Front
11412013FX (Pg. 9)
Publicité
