Publicité
Les langues disponibles
Les langues disponibles
Assemble the SIDE BURNER VALVE (27) in detail 12-A.
Assemble the SIDE BURNER GRID (41) and the SIDE BURNER CONTROL KNOB (40) onto the Side burner. See detail 12-B.
Step
12
12-A
12-A. Attach the SIDE BURNER VALVE (27) (located on
the Hose/Valve/Regulator assembly attach to the
control panel) to the BASE with two screws (HA).
Note: the Side burner hose must be thread between
the left legs, not in front of the left leg.
WARNING: The orifice must be inside the
venturi tube.
HA
Side
Burner
Valve
Hardware shown actual size
HA
27
Top View
12-B. Set the SIDE BURNER GRID (41) tabs into
(2) Qty.
12-B
41
40
the slots on the Side Burner base and turn
the grid until it stops. Note: Before each use
turn the Side Burner grid to insure that it is
secure.
Push the SIDE BURNER CONTROL KNOB
(40) onto the Side Burner Valve stem.
11412013FX (Pg. 14)
Publicité
