Publicité
Les langues disponibles
Les langues disponibles
STEPS 10, 11 AND 12 ARE FOR THE 2000/3000 SERIES GRILL WITH A SIDE
Step
Attach the Side Burner assembly to the grill in detail 10-A.
10
Assemble the SIDE BURNER ELECTRODE with wires (8) in detail 10-B.
Note: Use both hands and lift with side table brackets. NEVER lift with plastic parts.
10-A
P
- A
RE
SSEMBLED
S
IDEBURNER
Left
10-A.Use the 6-lobe screwdriver to back out the outside screws
6-
LOBE
SCREWDRIVER
BURNER. IF YOU HAVE TWO SIDE TABLES GO BACK TO PAGE 9.
12
located in the top left legs (2 or 3 turns) just enough for the
SIDE BRACKETS (11 and 13) on the PRE-ASSEMBLED side
burner, to slide in place.
CAUTION: DO NOT Remove screws completely.
Place the bottom slot of the brackets on the screws first and
then the top slot. Note: The TOOL BAR (12) faces the front of
the grill.
Gently slide the Bracket down and tighten screws.
10-B
Grill
Front
10-B. Thread the blue SIDE BURNER ELECTRODE
JS
8
Top View
wires (8) through the Base and secure the Double
electrode to the base with one screw (JS).
Hardware shown actual size
(1)
Qty.
11412013FX (Pg. 12)
Publicité
