Publicité
Les langues disponibles
Les langues disponibles
Assemble the CYLINDER (79) to the Cylinder caddy. See detail 13-A.
Place the CYLINDER RETAINER WIRE (77) over the Cylinder Collar. See detail 13-B.
Step
Attaching TYPE 1 fitting to the fuel outlet valve in detail 13-C.
13
Outlet
Valve
Engineering Code
LD113342 * /LD113322 *
LE113342 * /LE113322 *
LE113343*
*Cylinder not included
13-A Set CYLINDER (79) in the cylinder caddy
with the outlet valve facing the front of the
grill.
IMPORTANT!
T
O ENSURE PROPER GAS FLOW
"OFF"
CONTROL VALVES MUST BE
OPENING THE GAS CYLINDER VALVE
13-A
13-B
79
13-B Place the CYLINDER RETAINER WIRE (77)
over the Cylinder collar, by rotating the wire
from the original position toward the cylinder
collar.
WARNING:
grill and when attaching or replacing the
L.P. gas cylinder, insure that the gas
supply hose is free of kinks and/or
,
BURNER
damage and is at least 3" away from hot
BEFORE
surfaces such as the grill casting.
.
77
13-C
Left end
13-C Insert the TYPE 1 nipple of the regulator (27)
During assembly of
77
Outlet
Valve
Type 1
27
Nipple
79
into the cylinder's fuel valve outlet as shown.
Turn the regulator hand wheel clockwise to
tighten. No tools are needed. The Hand
wheel will come to a complete stop when the
connection is secure and gas will not flow until
a positive seal is achieved.
11412013FX (Pg. 15)
Publicité
