Installation - Dsoon H8WIFI Manuel De L'utilisateur

1.Open the two latches on the right side of the camera,
and then open the battery protection cover. For maxi-
mum battery life, you should install 8 new 1.5V AA
Alkaline batteries into the battery slots.(Removing the
battery will reset the camera time and date)
2.Recommends using new batteries. Choose the type of
battery you use when you turn it on. Anytime you load or
unload batteries, make sure that the camera is OFF.
3.Using an external power source: you can connect an
external 6V DC power source with at least 1.5A to the DC
Port at the bottom of the camera. The power connector is
a 3.5x1.35 mm coaxial DC power plug with positive tip
(inside pin) polarity. Leave internal batteries in the camera
during use.
Work with
1.5V AA Alkaline Batteries
Loading Batteries
Tips： Use the hook next to the DC
port to fix the external power cord

Installation

7