Using The Wall Bracket - Dsoon H8WIFI Manuel De L'utilisateur

Using the Wall Bracket

1.Mark the drill holes by holding the foot of the wall
bracket at the desired mounting location and marking
the hole positions.
2.Use a drill with a 6 mm drill bit to drill the required
holes and insert the plugs and insert the wall plugs
flush with the wall.
3.Screw the wall bracket to the
wall using the supplied screws .
4.Mount the camera on the
tripod screw and screw the
camera a little way on (about
three turns).
5.Turn the camera in the
desired direction and lock
it with the lock nut .
6.To move the camera into its final position, undo the two
pivot bolts a little, position the camera and fix the position
by tightening the two pivot bolts.
Note:
Ensure that there are no electric lines, water or heating pipes
installed at the proposed drilling location.
The supplied wall plugs are only suitable for mounting on concrete
and stone. Before starting the installation, please check your
installation location carefully for its suitability for the plugs.
16
Using the Wall Bracket