Drill Stands - Husqvarna DS150 Manuel D'utilisation

Drill stands

DS150
• The stand is for drilling in ceilings, walls and floors.
• The baseplate is made of aluminium making it very
light in weight. It has an inbuilt vacuum plate.
• The column can be tilted 0-60°.
• The stand is fitted with a collar.
• The feed handle can be used to loosen and tighten the
collar, adjust the adjustment bolts in the baseplate
and to adjust the angle of the column.
Accessories
• Gear box
• Wheel set
• VP 200 Vacuum pump
PRESENTATION
DS250
• The stand is for drilling in ceilings, walls and floors.
• The baseplate is made of aluminium making it very
light in weight. It has an inbuilt vacuum plate.
• The column can be tilted 0-60°.
• The drill stand is equipped with a quick connection
plate for the drillmotor.
• The wheel kit is removable.
• The feeder housing's transmission is adjustable. The
higher gives 2.25:1 and the lower, 1:1.
• Feed lever can be used to adjust base plate leveling
screws and set desired column tilt.
Accessories
• Collar to fit to the quick mounting bracket
• VP 200 Vacuum pump
–
English 5