TMT122
en
2 Function
3 Dimensions
12
Due to its construction, the transmitter cannot be repaired. When dispo-
sing of the head transmitter, please take note of the local disposal regula-
tions.
The unit must only be powered by a power supply that operates using an
IEC 61010-1 compliant energy limit circuit: "SELV or Class 2 circuit"
Electronic monitoring and transformation of various input signals into an ana-
log output signal in industrial temperature measurement. Setting up of the
transmitter is done using the HART
Field Xpert SFX100 and the hand operating module (DXR375) or PC (Field-
®
Care or ReadWin
2000).
Dimensions in mm (in)
®
protocol using the device configurator
Endress+Hauser
A0015202