Replacing The Battery - Anslut 018346 Mode D'emploi

contact plate.
FIG. 2
3. Replace the solar panel on the chimney.
4. Place the solar lamp so that it is exposed to the sun for at
least 48 hours to charge the battery.
Positioning
• The position, weather conditions and season affect the
length of time that the batteries can power the lamp. If the
solar panel has been in sunlight for 8 hours, the solar lamp
will shine for up to 6 hours.
• The batteries will not be fully charged if the solar lamp is
placed in the shade, which will result in a shorter lighting-up
period and reduce the lifespan of the batteries.
• Do not place solar lamps near sources of light such as street
lamps, this can prevent them from lighting up.
MAINTENANCE

Replacing the battery

1. Twist the solar panel to release it from the chimney.
2. Unscrew the screw holding the battery cover.
3. Lift off the battery cover.
4. Remove the old battery and insert a new rechargeable
battery. Make sure the new battery is properly inserted.
5. Replace the battery cover and fasten it with the screw.
6. Fasten the solar panel on the chimney.
EN
19