Moving The Wet/Dry Vac; Muffler/Diffuser - Craftsman CMXEVBE175840 Guide D'utilisation

Moving the Wet/Dry Vac (Fig. J)
Should it become necessary to pick the Vac up to move it,
use the Dust Drum Latch Handles.
To maneuver the Vac, the Carry Handle on top of the
Powerhead Assembly should be used.
Fig. J
Dust Drum Latch
Handles (2)
20 Gallon (75 Liters) Shown
10
SP7075-1 6, 9, 12, 16, 20 Gallon 2019.indb 10
Muffler / Diffuser (Fig. K)
Depending on your Model, your Vac may come with a
Muffler/Diffuser. Insert the Muffler/Diffuser Locking End
into the Vac Blowing Port, when the Vac is not being used
as a Blower. The Muffler/Diffuse should snap into place.
To Remove the Muffler/Diffuser from the Blowing Port,
press the Muffler/Diffuser Release Button and pull out of
Powerhead
the Blowing Port.
Assembly
Carry Handle
Fig. K
Vac Blowing Port
20 Gallon (75 Liters) Shown

Muffler/Diffuser

Release Button
(Locking End)
Muffler / Diffuser
2/22/19 10:31 AM