Troubleshooting Guide - DeWalt DCS353 Guide D'utilisation

In addition to the warranty
2 YEARs FREE sERViCE On D
DC9071, DC9091, DC9096, DC9182, DC9280, DC9360,
DCB120, DCB122, DCB124, DCB127, DCB201, DCB203BT,
DCB207, DCB361
3 YEARs FREE sERViCE On D
DCB200, DCB203, DCB204, DCB204BT, DCB205, DCB205BT,
DCB206, DCB208, DCB230, DCB240, DCB606, DCB609,
DCB612, DCB615
nOTE: Battery warranty voided if the battery pack is
tampered with in any way. D
any injury caused by tampering and may prosecute warranty
fraud to the fullest extent permitted by law.
90 DAY MOnEY BACK gUARAnTEE
If you are not completely satisfied with the performance of
your D WALT Power Tool or Nailer for any reason, you can
e
return it within 90 days from the date of purchase with a
receipt for a full refund – no questions asked.
lATin AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in
the packaging, call the local company or see website for
warranty information.
FREE WARning lABEl REPlACEMEnT: If your warning
labels become illegible or are missing, call 1-800-4-D
(1‑800‑433‑9258) for a free replacement.
For assistance with your product, visit our website at www.dewalt.com for a list of service centers, or call D
1-800-4-D WALT (1‑800‑433‑9258).
e
PROBlEM
Unit will not start.
Battery pack will not charge.
Unit shuts off abruptly.
WAlT BATTERY PACKs
e
WAlT BATTERY PACKs
e
WALT is not responsible for
e
e

TROUBLESHOOTING GUIDE

BE sURE TO FOllOW sAFETY RUlEs AnD insTRUCTiOns
POssiBlE CAUsE
Battery pack not installed properly.
Battery pack not charged.
Internal components too hot.
Battery pack not inserted into charger.
Charger not plugged in.
Surrounding air temperature too hot or
too cold.
Battery pack has reached its maximum
thermal limit.
Out of charge. (To maximize the life of the
battery pack it is designed to shutoff abruptly
when the charge is depleted.)
WALT
Check battery pack installation.
Check battery pack charging requirements.
Allow tool to cool down.
Insert battery pack into charger until LED illuminates.
Plug charger into a working outlet. Refer to Important
Charging Notes for more details.
Move battery pack to a surrounding air temperature of above
40 °F (4.5 °C) or below 104 °F (+40 °C).
Allow battery pack to cool down.
Place on charger and allow to charge.
WALT at
e
sOlUTiOn
English
15