Setting Your Speaker System For Multichannel Audio Playback - Pioneer DV-626D Mode D'emploi

Setting Your Speaker System
for Multichannel Audio
Playback
This player player contains a built-in decoder for Dolby
Digital and DTS audio sources as well as 5.1 channel
discrete audio output. Ideally, a 5.1 channel system
contains 6 speakers: 2 front speakers, 2 surround
speakers, a center speaker, and a sub woofer. However,
as this is not always the case, accurately setting the
[Speaker Setting] setting to reflect your speaker setup
allows the player's built-in decoder to reroute signals to
compensate for absent speakers.
Make adjustments in the [Speaker Setting] setting in the
Setup screen Audio 2 menu.
Notes
• If you have already completed the Setup Navigator screen
operations, the settings on this page have already been set by
the player.
• If you have not made connections to the AUDIO OUT (5.1ch)
jacks on the rear panel of the player, it is not necessary to
make any changes to this setting.
1
Use the cursor buttons (2/3) to select the
speaker.
Every time the cursor button is pressed, the
selected speaker changes in the following order.
3Center 2
3 Surround 2
1 Audio2 Video Language
Speaker Setting
Center
Speaker • • •
On
Move
–/+
ENTER
About source audio output
When the source input mode has been switched between the 5.1 Channel and 2 Channel mode settings using the
[Audio Out] setting in the Setup screen Audio 2 menu or by pressing 5.1 CH MODE on the front panel, audio output
for each source will be as shown on the following table.
AUDIO OUTPUT AUDIO OUT (2 CH)
CONTENTS MODE
5.1 ch MODE Front Lch, Rch
Dolby
2 ch DOWNMIX
Digital
2 CH MODE
L ch, R ch
2 ch DOWNMIX
5.1 ch MODE
Dolby
L ch, R ch
Digital
2 ch DOWNMIX
Karaoke
2 CH MODE
L ch, R ch
5.1 ch/2 ch
L ch, R ch
LPCM
MODE
5.1 ch MODE
Front Lch, Rch
DTS
2 ch DOWNMIX
2 CH MODE
L ch, R ch
5.1 ch/2 ch
Lch, Rch
CD
MODE
5.1 ch/2 ch
Lch, Rch
Video CD
MODE
* 1 When the VIRTUAL DOLBY DIGITAL indicator is lit, PCM output is muted.
* 2 When the Setup screen Audio 1 menu [DTS Out] setting is set to "Off", DTS digital output is muted.
All manuals and user guides at all-guides.com
3 Sub-woofer 2
General
L R
SW
LS RS
Return
Select SETUP Exit
AUDIO OUT (5.1 CH)
L,R Front L,R Center
Front Lch, Rch Center
2 ch DOWNMIX
MUTE
L ch, R ch
2 ch DOWNMIX
MUTE
L ch, R ch
2 ch DOWNMIX
MUTE
L ch, R ch
L ch, R ch MUTE
Front Lch, Rch Center
2 ch DOWNMIX
MUTE
L ch, R ch
Lch, Rch MUTE
Lch, Rch MUTE
2
Use the cursor button (∞) to move the
cursor down to the speaker bar and use
the cursor buttons (2/3) to select "On"
or "Off" corresponding to whether the
selected speaker is present in your
system or not, respectively.
1 Audio2 Video Language General
Speaker Setting
Center
Speaker
On
Move
–/+
Select
ENTER
Notes
• To help identify the speakers being selected, the initials
of the speakers in the speaker system representation on
the right side of the screen will appear in blue.
• When "On" is selected for a speaker or pair of speakers,
the icons for those speakers turn yellow in the speaker
system representation on the right side of the screen.
• If "Off" is selected for both [Center Speaker] and
[Surround Speaker], [Sub-woofer] is automatically set to
"Off".
• When the sub woofer is "On", the low range
components of the center and surround signals will be
mixed in the LFE signal and output from the SUB
WOOFER jack.
• When the sub woofer is "Off", the low range
components of the center and surround signals will be
mixed in the L and R signals and output from the front
speakers.
• Speakers in this menu setting can also be turned on and
off using CENTER, SURROUND, and SUB WOOFER on
the front panel. However, these buttons do not work
when the GUI indicator is lit.
Dolby Digital 3 PCM
Surround L, R Sub Woofer
Surround Lch Rch LFE
MUTE MUTE
MUTE MUTE
MUTE MUTE
MUTE MUTE
Surround Lch Rch LFE
MUTE MUTE
MUTE MUTE
MUTE MUTE
L R
SW
LS RS
Return
Exit
SETUP
DIGITAL OUTPUT (S/PDIF)
Dolby Digital
MUTE Dolby Digital
*1 L ch, R ch Dolby Digital
MUTE Dolby Digital
L ch, R ch Dolby Digital
L ch, R ch L ch, R ch
*2 DTS *2 DTS
*2 DTS *2 DTS
Lch, Rch Lch, Rch
Lch, Rch Lch, Rch
33
En