Honda FF500 Manuel De L'utilisateur page 64

Rear wheels do not turn by squeezing main clutch lever.
Order Check item
1 Gearshift lever
position
2 Wheel pin
3 Main clutch cable
4 Clutch oil level
5 Transmission oil level Bring the transmission oil level to the specified
Rotary does not turn by squeezing main clutch lever.
Order Check item
1 Gearshift lever
position
2 Rotary pin
3 Rotary
4 Main clutch cable
5 Clutch oil level
6 Transmission oil level Bring the transmission oil level to the specified
Hard tilling/hard to move the tiller.
Order Check item
1 Front wheel
Condition/Remedy
Set the gearshift lever in the proper gear position
(Forward or Reverse)
Install the wheel pin and retaining pin securely if it
is missing or out of position.
Adjust main clutch cable properly.
Bring the clutch oil level to the specified level.
level.
Condition/Remedy
Set the gearshift lever in the proper gear position
(Forward or Reverse).
Install the rotary pin and retaining pin securely if it
is missing or out of position.
Remove the foreign material (stone, etc.) if
it is caught in the rotary.
Adjust the main clutch cable properly.
Bring the clutch oil level to the specified level.
level.
Condition/Remedy
Set in the proper position.
Refer to page
29 and 30
27
47
40
41
Refer to page
29 and 30
53
49 and 50
47
40
41
Refer to page
25
61