Playing An Usb Device - LENCO SCD-38 USB Manuel De L'utilisateur

Note A: If you have reached the first track of the root directory or in the current
folder and there are multiple folders in the root directory the unit will automatically
go back to the last track of the previous folder (USB playback).
Note B: The prev button also works as a rewind function so sometimes this
button must be pressed twice to go to the previous track.
Fast backward through the currently playing track
Press and hold the prev button (3) to fast backward through the currently playing
track.
Switching between folders (MP3/WMA only)
Press the folder button (1) once to activate the folder mode. When this mode
is active the current folder numbers starts to flash in the display.
Press the folder button (1) again to move to the next folder.
Repeat function
Press the REPEAT button (4) once to repeat the currently playing track.
When this mode is active the repeat LED flashes.
Press the REPEAT button (4) twice to repeat the current folder. When this
mode is active the repeat LED burns continuously but after a few seconds the
display flashes and will show the folder number.
Press the REPEAT button (4) three times to repeat the whole medium. When
this mode is active the repeat LED burns continuously.
Creating a playlist
You can make a playlist up to 20 tracks.
1. Press the STOP button (8).
2. Press the PROG button (10) P.01 will start to flash.
3. Press the PREV/NEXT button (3/2) to select the desired track, and press the
PROG button (10) to confirm.
Note: (If available) to step through the folders, activate folder mode by
pressing the folder button (1). Now press the folder button (1) to step through
the folders. For example, to go to folder 3 press 3 time the folder button (1).
Via the PREV/NEXT button (3/2) you can select the desired track, press the
PROG button to confirm.
Repeat step 3 to program other tracks.
4. When you are finished, press the PLAY/PAUSE button (9) to start the playlist.
Repeat the playlist
Press the REPEAT button (4) once to repeat the current track.
Press the REPEAT button (4) twice to repeat the playlist.
Cancel the playlist
Press the STOP button (8) twice to cancel the playlist.

Playing an USB device

Connect a USB device to the USB socket (15).
1. Slide the FUNCTION switch (16) into CD/USB (AUX IN) position.
The unit will now start reading the USB device. This may take some time.
After the reading is complete the unit will start to play automatically.
2. Slide the FUNCTION switch (16) into OFF position to turn off the unit.
12