ESAB PT-37 Manuel D'instruction page 440

SECTION 5
WARNINg
5.3 Removal / Replacement of Torch Body
1. Unscrew the handle from the torch body assembly. Pull handle back onto the torch cable assembly to
expose the torch connections.
Replacement of the torch consumables is recommended when replacing the torch body.
Grasp torch body assembly in this area
and hold securely, twist handle in direc-
tion shown
MAKE SURE ThAT ThE POWER SOURCE hAS BEEN TURNED OFF AND
ThAT PRIMARY POWER hAS BEEN DISCONNECTED BEFORE PRO-
CEEDINg.
Note:
Figure 5-1.
440
MAINTENANCE
Handle