Torch Installation Esp-101 - ESAB PT-37 Manuel D'instruction

SECTION 3
3.2

Torch Installation ESP-101

1. Remove torch lead access door on the left side of the ESP-101.
2. Insert the torch cable through the torch access opening on
the front of the console.
3. Connect the air hose to the quick-connect fitting.
4. Connect the torch cable male receptacle to the panel recep-
tacle. Check orientation of the sockets to ensure a correct fit.
Torch Lead Access Door
Torch Cable
Power Cable Female Receptacle
Power Cable Male Receptacle
18
INSTALLATION
Torch Access Opening
Air Hose