Connecting Instrument To Portable Power Source; Recharging The Portable Power Source; Accessing Spare Lamp - Welch Allyn LumiView Instructions De Fonctionnement

Connecting Instrument to Portable Power Source:

Plug instrument power
l
cord into the power cord
connector port on top of the
power source.
Push in until firmly in place.
l
Gently screw the external
l
connector sleeve clockwise
to secure (optional).

Recharging the Portable Power Source:

Turn portable power source off.
l
Disconnect instrument from
l
power source.
Plug charging transformer into
l
portable power source.
Plug charging transformer into
l
wall socket. LED light indicates
unit is charging.
Disconnect charging
l
transformer from power source
when fully charged, after
10-12 hours.

Accessing Spare Lamp

Lift the spare lamp out of
l
its receptacle and use.
Portable Power
On/Off
Source
15