Accessories; Pneumatic Speculum Holder; Lamp Replacement - Welch Allyn LumiView Instructions De Fonctionnement

Accessories

Pneumatic Speculum Holder

A pneumatic speculum holder with a
l
4x's magnification lens can be used
to aid in examination of the ear.

Lamp Replacement

To change the lamp, flip the binocular assembly into its up position.
l
Remove the reflector assembly by placing the thumb on the
notch located on the bottom of the reflector housing and pushing
the reflector assembly. (Step 1)
Remove lamp and insert a new Welch Allyn lamp No. 08500 into
the back of the reflector. (Step 2)
Replace reflector housing into instrument and push until it snaps
into place.
NOTE: Reflector assembly air vents should be positioned top
and bottom.
Step 1
CAUTION:
Lamps may become very HOT. Be
sure to allow lamps to cool before changing.
Binocular assembly
Reflector
assembly
Step 2
11