Test Certificate - Siemens simovert masterdrives 6SE70 Serie Instructions De Service

Certificates

Test Certificate

Equipment
• Type
• Order No.
The 100% inspection was performed according to test instructions
Motion Control 6SE70xx-xxPxx.
Test scope:
I. Protective conductor
II.
III. Function test
IV. RUN-IN
V. Function test
The equipment complied with the test requirements.
The test results are documented within the test database.
1) See rating plate for complete type designation, serial number and technical data
A&D DS A PE D P
Schlögel
9-2
test
Insulation test
acc. to EN 50178
acc. to EN 50178
Automation and Drives
Erlangen, 15.09.1998
drive converter
SIMOVERT
MASTERDRIVES
6SE70xx-xxPxx
• According to DIN VDE 0411
• Acc. to EN 50178, Section 9.4.5.2 and
UL508/CSA 22.2-14.M 91, Section 6.8
• Initialization and start-up
•
Customer terminals test
•
Power section inspection
•
Inspection of protection and monitoring
devices
•
Continuous test > 5 hours
ambient temperature 55 °C
• see III. Function test
6SE7087-7NP87-2DD0
Operating Instructions
12.98
1)
Siemens AG
SIMOVERT MASTERDRIVES