Leuze electronic AMS 3 Serie Mode D'emploi page 26

5.2 Viewing and editing parameters
As long as parameter enabling is activated, the entire AMS
Setting of values such as addresses
If input of a value is possible, the display looks like this:
100
<-|0123456789
Default ----------------- unit
126
Use the
be corrected by selecting <-| and then pressing
Then use the
After the addresses or parameters have been set, deactivate parameter enable.
Notice!
For devices with GSD, EDS or XML files, the addresses are set via the display. All other
parameters are managed via the files named.
12
save
| |
and buttons to set the desired value. An accidental, incorrect entry can
buttons to select Save and save the set value by pressing
Delete character
Enter digit
Save
.
i
AMS 3xx
3xxi display is inverted.
Leuze electronic
.