General Specifications - Leuze electronic AMS 3 Serie Mode D'emploi

2 Specifications (excerpt)
2.1

General specifications

Measurement data
Measurement range
Accuracy
1)
Consistency
Light spot diameter
Traverse rate
Electrical data
2)
VIN supply voltage
Current consumption
without device heating
with device heating
Optical data
Transmitter
Laser class
Sw. inputs/outputs
Mechanical data
Housing
Optics
Weight
3)
Protection class
Environmental conditions
Operating temperature
without device heating
with device heating
Storage temperature
Rel. air humidity
(non-condensing)
1) Statistical error: 1 sigma; minimum switch-on time: 2min.
2) For UL applications: only for use in "Class 2" circuits acc. to NEC.
3) For screwed M12 plugs or mounted caps.
4) With devices with heating, the switch on/off area of the internal heating can be extended to prevent
condensation from forming. A 100% prevention of the formation of condensation cannot be guaran-
teed due to the limited heating capacity of the AMS 3xxi.
4
AMS 3xx 40 (H)
0.2 ... 40m
± 2mm
0.3mm
d 40mm
Inputs
Outputs
4)
AMS 3xx 120 (H)
0.2 ... 120m
± 2mm
0.5mm
d 100mm
d 10m/s
18 ... 30VDC
d 250mA / 24VDC
d 500mA / 24VDC
laser diode, red light, wavelength 650 ... 690nm
2 acc. to EN 60825-1, CDRH
2, programmable
protected against polarity reversal
max. 60mA, short-circuit proof
cast zinc and aluminum
glass
approx. 2.45kg
IP 65 acc. to EN 60529
-5°C ... +50°C
-30°C ... +50°C
-30°C ... +70°C
max. 90%
i
AMS 3xx
AMS 3xx 200 (H) AMS 3xx 300 (H)
0.2 ... 200m 0.2 ... 300m
± 3mm
0.7mm
d 150mm
Leuze electronic
± 5mm
1mm
d 225mm