Festo Soft Stop SPC11 Serie Guide De Référence Rapide page 22

Connect an earth cable with sufficient cross-sectional area
to the drive if the drive is not fitted onto an earthed ma-
chine stand.
Special earthing measures for components other than
those shown here can be found in the System manual for
the SPC11.
Pin assignment on the Control connection
Connection
24 V
0 V
Output
O1: P.01
O2: P.02
O3: P.03
O4: P.04
O5: Error
O..: Output
22
Pin Description
Power supply
15
14
Pin Description
Supplies a 1-signal when
13
the drive is in the appropri- the drive is in the appropri
12
ate position. Supplies a p pp
1-signal for 50 ms when
11
the drive moves past the the drive moves past the
appropriate position.
10
9 Supplies a 1-signal if there
is an error.
Festo SPC11-... 0012NH English