Function Introduction For Combination Buttons; Child Lock Function - Gree GTHCA-K6DNA1A/I Mode D'emploi

● When selecting "
displays outdoor ambient temperature.
Note:
● Outdoor temperature display is not available for some models. At that time, indoor
unit receives "
● It's defaulted to display set temperature when turning on the unit.There is no
display in the remote controller.
● Only for the models whose indoor unit has dual-8 display.
● When selecting displaying of indoor or outdoor ambient temperature, indoor
temperature indicator displays corresponding temperature and automatically turn
13
TURBO button
Under COOL or HEAT mode, press this button to turn to quick COOL or quick
HEAT mode. "
to exit turbo function and "
14
SLEEP button
Under COOL, HEAT mode, press this button to start up sleep function. "
is displayed on remote controller. Press this button again to cancel sleep function and
" " icon will disappear.
15
LIGHT button
Press this button to turn off display light on indoor unit. "
controller disappears. Press this button again to turn on display light. "
displayed.

3.4 Function introduction for combination buttons

Child lock function

Press "+" and "-" simultaneously to turn on or turn off child lock function. When
child lock function is on, "
the remote controller, the "
the unit.
Temperature display switchover function
Under OFF status, press "-" and "MODE" buttons simultaneously to switch temp-
erature display between ℃ and ℉ .
" with remote controller, temperature indicator on indoor unit
"signal, while it displays indoor set temperature.
" icon is displayed on remote controller. Press this button again
" icon will disappear.
" icon is displayed on remote controller. If you operate
" icon will blink three times without sending signal to
8
Floor Ceiling Type Unit
" icon
" icon on remote
" icon is